AP Lazer

1709 Thompson St. #311
Lansing, Michigan 48906

(800) 585-8617
Speak to an Expert

LASER MACHINE

LASER MACHINE

  • Laser Top Details Split your machine in half – place it atop the utility carriage and roll large objects beneath to laser.
  • EZ Leveling Details EZ Leveling Wheels allow you to adjust the four corners of the machine independently. The EZ Leveling system reduces the need to use shims to level materials and increases safety when working with heavier materials.
  • Laser Tube Power Details A state of the art, S Series Reci 100w laser tube provides exceptional performance, advanced stability and is highly efficient. Reci laser tubes are liquid cooled, economically replaceable, and easily aligned. Cutting speed is often doubled and a longer life span is expected in comparison to other laser tubes.
  • Speed/Power Control Details Control both speed and power with the computer and/or the control panel on the AP Lazer. A percentage based power setting that allows for corner compensation when utilizing cut mode operation. Speed is controlled by a literal setting rather than a less reliable percentage based system. Speed can be set from .001 inches per second up to 31 inches per second. This system of speed control allows for ultimate precision when making speed adjustments.
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
  • LaserCut Interface Details The LaserCut interface, proprietary to the Leetro controller, allows for the handling of numerous file types from many types of photo-editing and CAD software packages. (Including but not limited to: CorelDraw X7, Adobe Creative Suite, AutoCAD, and CAD software platforms.) The LaserCut interface is compatible with Windows® XP/7/8/10 both 32bit and 64bit operating systems. The file transfer is performed via USB connection to the computer at speeds up to 500KB per second or via USB Flash Drive direct transfer.
  • Advanced Memory Controller Details Standalone Leetro controller with 128MB of independent memory allows for processing and storage of numerous larger sized files. The standalone controller allows for computer free operation once the file has been downloaded to the controller.
  • Red Dot Diode Details The Red Dot Diode provides a visual aid that assists in finding your starting position and proper positioning of your material to be engraved or cut.
  • Starting Positions Details The AP Lazer System allows you to select from 9 different starting positions in reference to the image or file to be engraved/cut. This allows for ultimate control and ease of operation breaking the confines of a “home position.”
  • Resolution Details While resolution is user controlled up to 1000 dpi, the actual engraving dpi is dependent upon the size of condensing lens installed on the laser engravers. The standard 2 inch condensing lens has a point of impact of .003 inches, allowing for approximately 300 dpi. The AP Lazer has additional lens sizes available allowing for different levels of precision and detail.
  • Air Assist Details High pressure air assist provides protection to the condensing optics and enhances engraving/cutting performance by removing debris and restricting combustible gases from the engraving surface, reducing the chance of fire.
  • Operating Modes Details The AP Lazer Systems allows for multiple modes of operation. Engrave or “raster” mode will allow the engraving of bitmap images and/or vector files. Cut mode will allow for the cutting or tracing of vector file formats. You may also combine the different operations with different layers to perform multiple functions during a single operation.
  • Belts Details AP Lazer Systems utilize high quality rubber belts. The less rigid rubber belts are ideal for prolonging the life of the stepper motor drive systems and pulley bearings by not applying a constant rigid torque on the components.
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
  • Ventillation Details Vents out smoke, dust and fumes. AP Lazers are equipped with a blower and 6″ fitted aluminum flexible vent that attaches to the top of the machine. If fumes are harmful, an additional filter is required (not packaged with AP Lazer.)
|
Categories

Newsletter

Archives

Copyright AP Lazer 2017. All Rights Reserved | Foundry512 | Site Map